Antix wifi не работает

Connect to the Internet

antiX should automatically connect you to the Internet if you are using a wired (ethernet) connection. For wireless, you will have to configure your network connection. antiX provides 2 tools for this; ceni and wicd. antiX devs recommend ceni because it uses a lot less RAM.

Ceni is the default network manager used on antiX. It is a CLI application, which allows users to configure /etc/network/interfaces through a command-line interface. It supports wired and wireless connections.

The screenshots below show the procedure for a WPA wireless set up.

antiX also ships with wicd on antiX-full and antiX-base. Default boot from live media has wicd DISABLED! If you prefer it over ceni, then you MUST enable it at the live boot menu by pressing F4 > wicd.

Wicd is probably the better choice if you use wireless on the go on a laptop eg from various cafes, hotels etc.

Dialup

Some may wonder why we still include this option. It is because so many parts of the world only have dialup. antiX ships with gnome-ppp as it is light and simple to configure.

Источник

Antix wifi не работает

IвЂ™ve just loaded AntiX; now IвЂ™m trying to configure wirelessвЂ¦
(I thought the OS would automatically detect wireless, but apparently it doesnвЂ™t.)
First I tried Control Center/Connect Wirelessly (wicd): no go.
Then I rebooted into Windows to confirm that the computer could/and did detect wireless (through the Belkin card). It does.
Then I looked up wireless on this forum and found out that by going to
========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:»http://antix.mepis.org/index.php?title=Howto_articles#Ceni»
linktext was:»http://antix.mepis.org/index.php?title= . icles#Ceni»
====================================
I could try both Wicd and Ceni, two approaches to wireless.

Wicd: No wireless networks found. Connection Info: Disconnected (never had the Wicd Network manager pop upвЂ¦(maybe once last nightвЂ¦)) I do seem to remember a field containing вЂњeth0вЂќ that, if I could get the window back I would fill in with вЂњeth1вЂќ

Q1) How do I get the Wicd Network manager window back?

Ceni: Returns a terminal window:
Eth0 EthernetвЂ¦
Eth1 wirelessвЂ¦BelkinвЂ¦11Mbps-Wireless-Notebook (looked promisingвЂ¦)

Help page instructs:
antiX Control Center—> Network—> Network Interfaces—> click on your hardware interface (ex. eth0 wireless 00:00:00:00:00:00 ipw220 INTEL PRO 2915ABG) —> reconfigure eth0 (or whatever yours is ath0,wlan0,etc)—> Scan—> Choose a wireless network—> enter pw for WPA or WEP, or choose none if no encryption —> Accept—> Accept—> enter—>

which I took to mean:
antiX Control Center—> Network—> Network Interfaces—> click on your hardware interface (Eth1 wirelessвЂ¦BelkinвЂ¦11Mbps-Wireless-Notebook ) —>
reconfigure eth1 (by clicking onConfigure new logical interfaceвЂ¦пѓ Name for new logical interface вЂњBelkinWirelessвЂќ OK)—>
Reconfigure BelkinWireless—> Network settings for BelkinWirelessвЂ¦ I have no idea how to set them so I just clicked [Accept]

Executing a Terminal [root] ifconfig вЂ“a returns info on eth0 and eth1 but the information is the same for both of them and doesnвЂ™t mention BelkinвЂ¦

Q2) How do I continue with Ceni?

Q3) WhatвЂ™s the difference between Wicd and Ceni?

Источник

Linux Ubuntu не видит Wi-Fi адаптер на ноутбуке: оперативное лечение

Привет дорогой друг! Сегодня мы поговорим о достаточно частой проблеме, когда Ubuntu не видит WiFi. Тут в первую очередь нужно примерно представить из-за чего возникает такая ошибка работы системы или WiFi адаптера. Конечно, тут может быть два варианта: или программная поломка, или аппаратный конфликт. Точнее даже не аппаратная, а именно проблема с драйверами.

Давайте для начала просто проверим, что система видит и определяет беспроводной модуль. Для этого зайдите в консоль и пропишите команду:

$ sudo lsusb (Если у вас внешний модуль, подключенный к USB порту)
$ sudo lspci (Если модуль встроенный или подключенный к PCI шине)

Если вы увидите примерную картину, как на «скриншоте» выше – то значит модуль определяется. В противном случае у вас просто не установлены драйвера. Также можно попробовать ввести команды:

$ lshw –C network

После этого вы должны увидеть полное название и модель сетевой карты. Если её нет, то значит, также есть проблемы с установкой модуля и драйвера. Именно поэтому на Linux не работает WiFi адаптер.

Нет модуля

И так наша прошивочка стабильно работает, но вот модуля просто нет. Скорее всего его просто забыли установить или он встал криво. Также бывает, что пользователь мог скачать не тот драйвер. Вписываем:

Теперь, чтобы активировать нужный модуль, нужно прописать команду:

$ sudo modprobe ИМЯ_МОДУЛЯ

Вместо последнего значения нужно ввести именно то имя модуля, которое стоит у вас. После этого модуль должен начать стабильно работать.

Автозагрузка модуля

Если после перезагрузки вай-фай адаптер перестает нормально работать, то скорее всего модуль просто не установлен при загрузке системы. Он есть и включен, но при перезагрузке он не включается. Для этого прописываем:

$ sudo nano /etc/modules

Вы увидите текстовый файл, где загружены все модули при загрузке. Нужно аккуратно и нежно прописать именно ваш модуль в автозагрузку. Как посмотреть название адаптера – вы уже знаете.

У меня как-то были проблемы именно с подключением некоторых сайтов. Поэтому лучше всего сразу же решить эту проблему и прописать надёжные и правильные DNS адреса от Google.

Сначала правой кнопочкой «кликаем» по «Network Manager».
Изменяем соединение.
Выбираем именно наше беспроводное подключение, а не коннект по кабелю.
Переходим в IPv4.
Наши адреса нужно будет изменить только для DHCP.
Теперь устанавливаем два значения:
1. 8.8.8.8
2. 8.8.4.4

После сохранения, перезагрузите комп или ноут.

Сетевой менеджер удалён

Иногда это происходит по ошибке или из-за программного конфликта. Для начала давайте проверим, что сам менеджер ещё находится в кэше, если вы пока не перезагрузили компьютер или нуотбук. Прописываем команду:

$ sudo apt-get install network-manager

Если ничего не происходит, то в кэше его нет. Но установка менеджера возможно при прямом подключении по кабелю. После прямого коннекта к маршрутизатору просто пропишите туже саму команду.

Если это не поможет, то заходим прописываем команду:

$ sudo gedit /etc/network/interfaces

Откроется редактор, в котором нужно будет прописать:

auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-essid myssid
wpa-psk mypasscode

В самом конце опять через терминал прописываем:

$ sudo ifdown wlan0 && sudo ifup -v wlan0

Последняя надежда

В качестве последнего правильного рывка я бы посоветовал полностью переустановить драйвера на «Убунту». После этого с сетями в «Линукс» проблема должна решиться сама собой. По этому поводу я писал подробную статью, с которой вы можете ознакомиться тут.

Источник

Wifi with connman – antiX 19.2

For a long time, people have been having problems setting up their wireless connections with connman. Some were not able to find it, for some connman did not perform as expected. Others started using CENI before trying out connman.

I have created a video for all those users who are having difficulties with connman. It includes a few case scenarios:
– Connman is not in the Control Centre.
– Wifi is softlocked
– Connman doesn’t scan for Wireless Access Points.
– Connman gives out a strange error.

I hope this video can help all those who have problems with connman.

The only case I forgot to include is “The user set up wifi with CENI before trying out connman”.
For those reading this, the solution is to edit /etc/network/interfaces and remove the configuration created by ceni.
To edit the file, execute in terminal:
sudo geany /etc/network/interfaces
Edit the file until it only contains these lines:

Save the file and restart your system.

Thanks for reading.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

I hope this video can help all those who have problems with connman.

Save the file and restart your system.

Great stuff Xecure!

Thanks for your many helpful suggestions, definitely on this matter and consistently for many useful topics. I appreciate your efforts and explanations very much! 👍😎💡

Please make this sticky. Excellent video!

confirmed antiX frugaler, since 2018

Thanks, masinick and christophe.

It is the first video I have uploaded and it is much more time consuming than I expected. I have to take my hat off to dolphin_oracle for doing this so many times in the past. When editing the video I realized all the typos there, but it was my third time re-recording, so I just ignored them. I hope the viewers can ignore them and are able to follow the steps and understand what is going on.

This reply was modified 1 year, 1 month ago by Xecure. Reason: my thanks to both

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

I have not created any videos but I can appreciate the effort that goes into the work. Your comments also give us an even better appreciation for the work that Dolphin Oracle has done for a long time.

Keep up the good work. It all adds up to make an effective community and excellent software.

Xecure You are winning hearts too it’s the mood music. lol

Merryn Salas
1 hour ago
I need boyfriend 💋💋💋💋💋💞💞💞💞

anitX 19.4 — Core 5.10.57-antix.1-amd64-smp
Asus B450-I , Ryzen 5 3600 , RX5600XT , 32gb 3200 , WD Black 500GB M.2 NVMe ..

Many thanks for this excellent video Xecure!
I added it to the antiX main page under news.

Philosophers have interpreted the world in many ways; the point is to change it.

antiX with runit — leaner and meaner.

Very cool, hopefully this will resolve some of the uncertainties of users with connman.

(BTW, why is Merryn Salas so sure it’s a boy ?)

@Xecure- I’ve been quite busy, but I’ve now watched your video: great, great stuff.
Just one minor suggestion, in case you create more videos: use a small text editor window to write your messages, instead of doing it straight in the terminal, deleting everything and writing the commands… that may confuse newbies not used to the terminal…
You basically covered 99% of all possible wi-fi problems under antiX and how to solve them!

Thanks for all the feedback and the encouragement. I will try to improve if I ever do a new video. Initially, I wasn’t going to edit much, except blur the wi-fi access point info and add some music, but I saw the need for highlighting right-click and hold left-click. Then I started replacing the terminal comments with short captions, but every change was more work than expected. I wasn’t patient (I was lazy) and I just wanted to end it and upload it, so this is the result.

Thanks, anticapitalista, for publishing it in the main website. Hopefully it is easy to find in search engines, and we can resolve this small issue some people experience.

About the spammy comment, it is no more. It was funny, though.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

I spent a couple of days visiting my son and tired connecting my T430 to wifi it would connect ok, but on reboot the connection would be lost my fault entirely for not reading your post. As per #41036.

In the future will the troubles with connman interfering with ceni be fixed? As I now see connman in action I have no problem with it, and it will help new users connect to wifi easier if they are not used to using something like ceni.

Thanks for your time.

This reply was modified 1 year, 1 month ago by Brian Masinick. Reason: grammar

anitX 19.4 — Core 5.10.57-antix.1-amd64-smp
Asus B450-I , Ryzen 5 3600 , RX5600XT , 32gb 3200 , WD Black 500GB M.2 NVMe ..

I find that Connman works too, especially once you get used to it. Also, if it IS set up properly (and does not conflict with the settings of another network management program, it will automatically connect to the wireless name you select

I’m using antiX 19.2.1 runit too; started with Base and installed my preferred applications and utilities. It’s efficient and works well.

In the future will the troubles with Connman interfering with ceni be fixed?

If the script antix-wifi-switch (placeholder name) works well and is approved, then switching from Connman to Ceni (or viceversa) should be much easier in the future antiX releases.

This reply was modified 1 year ago by Brian Masinick.

antiX Live system enthusiast.
General Live Boot Parameters for antiX.

I’m running 19.2.1_386-base from the USB on an ASUS Eee PC netbook (4 GB, 512M). Connman doesn’t appear in Control Panel under Network. I followed the video and everything works until I restart the connman service. I don’t get any errors but I still don’t see any wifi networks. Also, Connman still doesn’t show up in Control Panel. I tried a lot of manual commands from the terminal and at one point, using Ceni, I was able to detect the wifi networks. However, after editing the connection with the SSID (I have a hidden network) and passphrase it still wouldn’t connect. It would attempt to but always failed with a “Bad Password” error. I tried re-entering the passphrase in quotes and also tried prefacing it with s2: both in quotes and without quotes. Nothing worked.

What’s interesting is when I run the full system I can get wifi to work but I think I still needed to restart the service to get Connman to appear. I would use the full system but when I try to install it it gets about 80 or 90% through the installation and freezes with a message about not being able to set the user passwords. I suspect it needs more than the 4 GB of space on this netbook. I really like how Antix runs on this netbook when I’m connected on the wired ethernet connection but it won’t be any good to me without wifi.

Any more suggestions on how I can enable wifi on the base version?

Источник