Как создать свой собственный приватный сервер в Insurgency Sandstorm
Этим постом мы расскажем вам о том, как создать свой собственный приватный сервер в Insurgency Sandstorm. И именно его вы сможете использовать для тренировок, изучения карты и поиска крутых спотов для обстрела.
Как создать свой собственный сервер приватный в Insurgency Sandstorm
Чтобы создать свой собственный сервер, сначала вам нужно скачать и настроить steamcmd и установить сервер Insurgency.
Затем создайте папку где-нибудь на вашем компьютере с именем steamcmd. Для этого примера я просто собираюсь поместить его прямо на диск C :
Затем вам нужно извлечь содержимое архива steamcmd.zip в вашу папку steamcmd.
После этого откройте окно командной строки (набрать cmd в командной строке) и выполните следующие команды:
—cd C:/steamcmd (помните, тут надо ввести ваш путь до папки)
Это установит и настроит steamcmd. Это должно занять не более 3 минут. После этого у вас должно появиться приглашение steam, на котором написано «steam>». Если вы не видите это приглашение steam после установки, просто запустите команду steamcmd еще раз. Далее вводим
Это установит сервер игры.В зависимости от скорости вашего интернета, это займет около 5-10 минут. Далее вводим.
Теперь, по какой-либо причине, вы должны запустить игру до запуска сервера, иначе Windows думает, что игра уже запущена и не откроет её.
Запускаем игру и заходим в главное меню. Там наводим курсор мыши на поле «Versus». Далее на поле «Обзор серверов»
Когда вы увидите экран браузера сервера, нажмите Alt + Tab, чтобы вернуться в окно командной строки.
Затем в окне командной строки вам нужно будет выполнить следующую команду:
InsurgencyServer.exe Oilfield?Scenario=Scenario_Refinery_Push_Security?MaxPlayers=28 -Port=27102 -QueryPort=27131 -log -hostname=»My Server”
Это откроет второе командное окно с целой кучей кода, прокручивающего экран. Это нормально. Как только откроется это второе окно, жмем Alt + Tab и возвращаемся к игре.
В левом нижнем углу экрана должно быть поле с надписью «IP-адрес сервера».
В этом поле введите:
Пропустите поле с паролем и вы стартанете игру! Удачной практики!
Источник
Insurgency sandstorm dedicated server как настроить
| 10,130 | уникальных посетителей |
| 185 | добавили в избранное |
The first thing you are going to need is the dedicated server and the accompanying srcds.exe from Steam. To find this go to your library and click on TOOLS.
Once you have downloaded the dedicated server you need to move the folder Insurgency Dedicated Server out of your Steam directory. We’ll get into this later but it’s very important that you copy the folder and not drag it to another location. I use my documents folder with a shortcut on my desktop but it doesn’t matter where you move it to as long as it is not in your Steam folder.
Next you are going to want to create a batch file to start your server. Do this by opening a new text document in Notepad. In this example I created a server running Hunt game mode on Siege with a lobby size of 8 players.
srcds.exe +maxplayers 26 -console -port 27016 +hostname «YOUR SERVER’S NAME» +map siege_coop hunt +rcon_password YOUR_PASSWORD +mp_coop_lobbysize 8
You do not need to add your public or internal IP address, only the port number you wish to use. I used 27015 but it doesn’t matter what you use 27015 through 27020. If you wish to play Hunt you will need to manually add it and the maps to your mapcycle_coop.txt file or it will default to Checkpoint.
Save your text as whatever you wish to name it and replace the .txt extension with .bat. Be sure to save as ALL FILE TYPES and not as a text document.
\Insurgency Dedicated Server\insurgency\cfg folder and open up server.cfg. Here you’ll find the cfg which your server runs off. In it you can set various options such as whether or not you want friendly fire on, what you want shown on the scoreboard, whether you want to use the local 3d voip or not as well as setting fast redirect url for maps and theaters if you wish to use custom maps or create your own theater.
Here is an example of my server.cfg for my PvP Firefight and VIP server:
exec mybans.cfg
mp_theater_override jihad_theater
sv_downloadurl «https://dl.dropboxusercontent.com/u/182919132/insurgency»
sv_allowdownload 1
log 1
logaddress_delall
logaddress_add d3v.hopto.org:1095
sv_hud_deathmessages 0
sv_hud_scoreboard_show_kills 0
sv_hud_scoreboard_show_enemy_classes 0
sv_hud_scoreboard_show_enemy_deaths 0
mp_round_freezetime 5
mp_round_lobbytime 25
mp_autoteambalance 1
mp_scrambleteams_auto 0
mp_scrambleteams_auto_windifference 0
mp_friendlyfire 1
mp_maxrounds 8
mp_winlimit 5
sv_vote_issue_kick_allowed 1
sv_vote_kick_ban_duration 1
sv_vote_issue_nextlevel_allowed 0
sv_vote_issue_nextlevel_allowextend 1
sv_vote_issue_nextlevel_prevent_change 1
sv_vote_issue_nextlevel_round_count_delay 0
sv_vote_issue_changelevel_allowed 0
sv_vote_issue_changegamemode_allowed 0
sv_vote_issue_switch_teams_allowed 1
sv_vote_issue_scramble_teams_allowed 0
sv_vote_issue_restart_game_allowed 0
sv_vote_timer_duration 15
sv_vote_command_delay 3
sv_allow_votes 1
sv_vote_failure_timer 0
sv_vote_creation_timer 0
sv_vote_quorum_ratio 70
sv_vote_allow_spectators 0
sv_vote_ui_hide_disabled_issues 1
sv_voiceenable 1
mp_voice_max_distance 1024
sv_alltalk 0
sv_deadchat 0
mp_voice_use_3d_voip 0
sv_deadtext 0
As you can see there are quite a few options that can be set using this file. I have classic comms (no 3d voip) set as well as FF enabled, deathmessages turned off, quite a few voting options disabled and auto team scramble turned off.
\Insurgency Dedicated Server\insurgency and open up mapcyce_coop.txt. This is where you’ll set your mapcycle if you aren’t using the default Checkpoint mapcycle. Below is my mapcycle. As you can see I had to add the maps myself for Hunt.
siege_coop hunt
uprising_coop checkpoint
ministry_coop hunt
market_coop checkpoint
district_coop hunt
heights_coop checkpoint
uprising_coop hunt
ministry_coop checkpoint
contact_coop hunt
district_coop checkpoint
heights_coop hunt
contact_coop checkpoint
buhriz_coop checkpoint
Now it’s time to set the game mode specific configurations you wish to use on your server. In your cfg folder where you found server.cfg you’ll see config files for the specific modes. In this example I used Checkpoint
«mp_maxgames» «1»
«mp_maxrounds» «7»
«mp_winlimit» «4»
«mp_roundtime» «900»
«mp_cp_capture_time» «30»
«mp_cp_deteriorate_time» «0»
«mp_spawnprotectontime» «0»
«mp_coop_min_bots» «8»
«mp_coop_max_bots» «32»
«mp_switchteams_each_round» «0»
«mp_switchteams_each_game» «0»
You can set from this file the number of rounds, how many wins it takes to win a game, round time, capture time and a lot of other things. I’m not going to go into detail on this one as it’s pretty self explanatory.
Now it’s finally time to start up your coop dedicated server. The first thing you’re going to want to do is EXIT STEAM. Remember how I had you move your dedicated server folder from your Steam directory? This is to prevent errors such as FAILED TO START GAME: APP ALREADY RUNNING and so it does not show you in game when you aren’t in game and your Steam overlay will work correctly when you are in game. Once you have started your server and it’s been initialized you can restart Steam without any worries. When done correctly your game should look like this
Источник
Insurgency sandstorm dedicated server как настроить
Creates a default checkpoint server.
Creates Mapcycle.txt
Creates Admins.txt
Creates complete Game.ini
Downloads SteamCMD, Creates Server Folder, Installs server, Manage Server including Install, Check process, Backup, monitoring with Discord Alerts, Starting, Stopping, Restart, Validate, Update, Pull Gamedig details. All Done from a PS terminal. >_
This is a Powershell version of my 2-click install. I added several features. Some input is required. It does create a Checkpoint server if you keep the default values.
| 1,752 | уникальных посетителей |
| 33 | добавили в избранное |
Install with PS:
open PowerShell and change the directory to where you want SSM to be installed.
Default Server files will be in the Steam-Server-Manager folder.
Run SSM to create config-local\local_settings.ps1
you should see the help menu appear
Custom Backup and ServerFiles Directories
you can specify server files location and separate backup locations, like separate drives.
custom backup and server files directories [github.com]
During install will prompt for Vars
Default settings used during install
Open a PowerShell terminal NOT as admin.
It will ask if using Anonymous login for steamCMD.
Press Enter for Anonymous
— Use interactive Menu instead of commands
— Starts sandstorm server process
— stop process for sandstorm server
— restarts process for sandstorm server]
— Creates a Task to Restart/Update server once a day
— checks process for sandstorm server, starts if porocess not running. =used by install-monitor
— Creates Scheduled Task to check if server is running every 15 minutes
— updates server files
— Creates zip folder of server files in backups folder
— Creates zip folder of server files in backups folder
Get details on server and host
Get gamedig details on server
Default Vars before first run
Server FIles
Path\To\Steam-Server-Manager\inssserver\*
Launch Param Vars
changing ports and server after install
Changing hostname here will auto-update the game.ini
Path\To\Steam-Server-Manager\inssserver\Variables-inssserver.ps1 — Launch param and editable Vars unique to instance.
ssm settings
Change default ssm settings in
Path\To\Steam-Server-Manager\config-local\local_settings.ps1
add Discord Webhook
change Custom Backup and Server files location
4. After install add mod IDs in
PATH\TO\Steam-Server-Manager\inssserver\Insurgency\Config\Server\Mods.txt
5. Start server. Mods will download and install in Insurgency\Mods
6. ./ssm mcrcon inssserver — to use rcon to use travel command to change to modded map or add to Mapcycle.txt
After installing and running. Can edit Variables-inssserver.ps1 to edit launch params like Ports or mutators, adding GSLT. Locate and edit Mapcycle, game.ini , enabling rcon, and admins.txt.
A list of all the modes doesn’t help to much because you also need to know the map that supports that Scenario.
scroll down to «Scenario List»
it will show all the Maps and the Scenario it supports is in Description. Quick google search for that mode and you can find out if its Co-op.
thank you, do you have an example for the different pve-types?
how do i change the map, i can´t write anything in the console
How can i set up a PVE only Server?
you want to add it before the install. Because if it’s empty during the install it will remove it from the launch params.
No worries if you installed already. add it the default-config\Sandstorm_default.ps1 and run the install again. no need to delete the files. it will just validate them. Then it will rebuild the variables-*.ps1. if you made changes in the Game.ini. you may want to copy it somewhere outside the serverfolder as a backup.
I went ahead and added the new map as well. ./ssm ssm update to get the new config.
Источник