Nbminer как настроить nanopool

NBMiner 39.5: Настройки для Binance, Скачать, Команды

4 мин на чтение

В этом руководстве вы узнаете, как настроить и использовать NBMiner версии 39.5 и новее для майнинга KawPow и Ethereum

Скачать для Windows/Linux

Что такое NBMiner

NBMiner — это программное обеспечение для майнинга на видеокарте (GPU). Работает только картах NVIDIA и AMD.

Как настроить NBMiner

Шаг 1 — Скачайте майнер

Скачайте программу NBminer, распакуйте ее в отдельную папку и найдите start.bat .

Шаг 2 — Настройте батник для KawPow

Откройте файл start.bat с помощью Notepad++ или любого подходящего текстового редактора и отредактируйте файл:

Вот пример .bat-файла NBMiner для пула Beepool (Ravencoin):

Шаг 3 — Запустите NBMiner

Сохраните этот файл и затем дважды щелкните start.bat , чтобы начать майнинг. Когда в окне CMD отображается слово «Accept» («Принято»), это означает, что вы успешно отправили свое решение в пул.

Видео Гид

Пример для Binance Pool

STRATUM:	ethproxy+tcp://ethash.poolbinance.com
PORT:	8888
Username:	username1
Password:	default

Так будет выглядеть батник NBMiner для ETH на пуле Binance Pool:

Чтобы настроить батник для MTP нам нужно поочередно ввести 5 команд:

1. nbminer — имя запускаемой нами программы
2. ethash — алгоритм для майнинга
3. ethash.poolbinance.com — адрес пула
4. 8888 — порт пула
5. username1 — имя пользователя от майнинг аккаунта на бирже.

Так будет выглядеть готовый батник NBMiner:

Настройка для NiceHash

Вот батник для НайсХеш:

Как настроить LHR на NbMiner для увеличения прибыли

Мы собираемся опробовать разблокировку 70% для карт LHR через HIVEOS! Ниже указаны разгоны, которые я использую в этом видео! Это НЕ будет работать с драйвером 471.11 или выше.

Разгон RTX 3070Ti AMP HOLO BLACK:

1. Работает стабильно в течение ночи (51+ MH в HiveOS).
2. Power Limit: 200.
3. Core: -200.
4. Memory: +2100.
5. Fan 80%.

Разгон RTX 3060Ti AMP HOLO BLACK:

1. Стабильно в течение ночи (40+ MH в HiveOS).
2. Power Limit: 130.
3. Core: -200.
4. Memory: +2200.
5. Fan 80%.

HiveOS: Разблокировка до 42 MH/s RTX 3060 Ti 8Gb LHR

Показано обновление драйверов nvidia в hiveos, как включить -lhr 68 только на одной видеокарте в целом риге и как обновить майнер в hiveos не дожидаясь общего обновления.

Мониторинг и прибыль

После того, как майнер стабилизируется примерно на 10-15 минут, вы можете проверить статус работы и прибыль на странице « Доходы» в аккаунте на бирже или на том пуле, который вы выбрали.

Алгоритмы и хешрейт

Алгоритм	Монета	P106-100	P104-8G	1070ti	1080ti	2080	RX580 2048sp
ethash	ETH	21.2M	34.5M	26.9M	46M	35.5M	24M
cuckatoo	GRIN31	X	0.89	0.94	1.56	1.65	X
cuckatoo32	GRIN32	0.215	0.38	0.41	0.63	0.65	X
cuckoo_ae	AE	3.35	5.5	5.15	7.9	8.75	X
progpow_sero	SERO	10.3M	17.5M	13.3M	22.5M	25.8M	10M
kawpow	RVN	10.3M	17.5M	13.3M	22.5M	25.8M	11M
beamv3	BEAM	12.5	19.6	19.5	26	30.5	X
octopus	CFX	5.5M	8.5M	9.8M	14.8M	48.5M	X
ergo	ERGO	41M	67M	52M	63M	73M	X

Сравнение NBMiner vs PhoenixMiner

Команды

—algo или короткий синоним этой команды -a — указывает алгоритм для майнинга (для примера: ‘mtp’, ‘lyra2Z’, ‘scrypt’, ‘myr-gr’)

Важно! Используйте либо длинный синоним —algo либо короткий -a . Вместе и то и то использовать не нужно.

Далее команды будут указаны через запятую. Сначала короткий синоним, а затем длинны. Помните, что нужно использовать только один вариант.

-v, —version — Отобразить версию и выйти.

-c, —config \ — Использовать конфиг в формате JSON вместо батника (CMD файла).

Альтернативы

Версии

• добавлено: новый режим LHR с низким энергопотреблением, добавлена -lhr-mode опция.
  • -lhr-mode 2 — это режим LHR по умолчанию, который представляет собой новый режим пониженного энергопотребления.
  • -lhr-mode 1 изменяет режим LHR на старую версию, которая совпадает с v39.2
  • -lhr-mode 1 подходит только для видеокарт с ограничением мощности, может достигать более высокого хешрейта, чем в режиме 2
  • -lhr-mode 2 способен достичь более низкой средней мощности и температуры. Особенно подходит для видеокарт с gddr6x как 3070ti, 3080, 3080ti. Энергопотребление в этом режиме колеблется, лучше использовать с заблокированной частотой ядра.
• добавлено: -lhr поддержка десятичного значения
• добавлено: для видеокарт LHR, когда обнаружена блокировка майнинга, майнер автоматически уменьшит -lhr значение на 0,1 и продолжит майнинг. Максимальное время уменьшения составляет 10, что в сумме составляет 1,0
• исправлено: более высокая загрузка ЦП при использовании —share-check 0 .

• функционал: добавлено обнаружение блокировки LHR и восстановление режима LHR для ethash.
• исправлено: улучшена обработка протокола ergo.

• оптимизация: улучшен хэшрейт ethash в режиме LHR на 1-2%, значение по умолчанию -lhr изменено с 68 на 69, также очень многообещающе установить вручную значение 70 .
• исправлена проблема с kawpow версии v39.0

Источник

NBMiner (AMD + Nvidia)

NBMiner is a GPU miner. It runs under Windows and Linux and has a build-in fee of 2.0%.

Installation

Download The Miner from GitHub and extract the archive to any folder.

Configuration

Windows

To change the configuration, open start_ergo.bat file and replace the values.

You also can modify any other start.bat files in the main miner folder.

Linux

Open start.sh file and replace the values

Where:

• YOUR_WALLET — your valid Ergo address.
• YOUR_WORKER_NAME — simple short worker name (like worker01). Optional.
• YOUR_EMAIL — your email address for notifications. Optional.

Double check you set your own wallet and it’s correct. Set a simple worker name to track your RIG on the pool and an email address to receive alerts when your RIG goes offline. Alternatively, you can set a passphrase instead to access the account settings.

Run

Double click the start.bat (start.sh for Linux) file to launch the miner.

For Linux — launch miner with cmd (terminal), like:

Note: cmd (terminal) must be opened in the same directory with the miner. You also can use cd to change current directory to the miner.

Additional Information

NBMiner takes additional 2.0% fee.

More information about NBMiner configuration can be found on GitHub .

Источник

Step-by-step guide

Here’s a quick step-by-step guide for newbies on how to mine Conflux on Nanopool

Getting started with Conflux mining is now easier than ever. All you need is a PC with a GPU (Nvidia/AMD) of 6GB minimum as Conflux heavily relies on memory usage while the core processor sits idle. You’ll also need a miner and an Conflux address to receive your mining reward. Check the list below and make sure your hardware/software meets the requirements:

PC/Mining Rig with at least 4GB of GPU memory each	The GPU should have at least 4GB of RAM or it won’t be able to properly mine Conflux. It’s due to the growing DAG file used in the Conflux PoW hashing process
Installed Windows/Linux OS	Make sure your Windows version is at least 7 and the OS, whether it’s Windows or Linux is 64 bit
Minimum 4GB of system RAM	4GB is fine as long as you don’t forget to increase the virtual memory (aka swap file) to at least 16GB
Stable internet connection	Your internet speed doesn’t need to be super fast, but it’s crucial that the internet connection is constant (get off Wi-Fi if possible)
Valid email address	It’s not necessary to use your email, however, if you want to receive alerts form the pool when your miner goes offline, you’ll need one
Mining software (Miner)	There are a lot of miners for mining Conflux but this guide is dedicated for a particular one called Nanominer
Conflux wallet address	To receive your rewards from the pool you’ll need to obtain an address. Important: Don’t use Ethereum Classic (ETC) or Ethereum (ETH) addresses.

Unfortunately, we don’t give any recommendations on what hardware to buy or which one is more profitable (search the mining forums to choose a hardware), therefore we’re going to assume you’re already running Windows/Linux on your RIG and the GPU you have meets the requirements.

Step 1: Get Your GPU Drivers Installed

Double check the drivers are installed in advance or if you installed them previously you can skip this step.

• To get the latest Nvidia GeForce drivers, click here and enter your GPU info then click “Start Search”. Download the current driver version from the results.
• For AMD GPUs, go here and choose «Support & Drivers». Enter your GPU info and click «Display results» then click the download button for your current driver.

Once downloaded, install the drivers like you normally would (next, next, OK, etc.) and reboot your RIG. You see your GPU’s are recognized correctly if you go into Device Manager (search in Windows search bar) and if you don’t see any warning marks on your GPU’s you’re good to go to the next step.

Step 2: Obtain an Conflux Wallet Address

There’s a number of ways you can get an Conflux address through, such as at a web-wallet like » Conflux Portal «, at an exchange or you can play it safe and use one of the local wallets. If you already have an Conflux address, just jump down to the next step. Remember, some exchanges don’t allow deposits from pools or don’t allow very small deposits, so double check with the site before mining directly to an exchange address, whereas setting up a local wallet requires to wait a while for the blockchain to download.

Bear in mind, storing your funds at an exchange/web-wallet is always associated with a risk

Step 3: Apply some Tweaks to Windows before mining

First of you don’t want your miner to be interrupt while mining if your RIG goes to sleep. You don’t want to your RIG to be automatically rebutted either, which may occur if Windows updates. And we also have to increase your Virtual Memory (aka swap file) to at least 16 GB that is required for Conflux mining.

Go to your Windows Power Settings and set it to Never sleep

Head to Control Panel/Administrative Tools/ Services. Scroll down to Windows Update and turn it off

If you’re running Windows Defender/Antivirus make sure to add an exception to it so that it doesn’t flag your miner as a virus (not necessary for Nanominer)

Go to Control Panel/System and Security/System/Advanced System Setting and set your Virtual Memory to 16384 MB (this is 16GB)

Step 4: Download and Set up a Miner

For Nvidia rigs

There are various of miners out there to choose from that are not covered here as we are doing to use our own miner called Nanominer in which our team put a lot of time and effort to make it simple to use and efficient to mine, so you should not have any trouble with it.

Depending on your OS, download Nanominer for Windows or Linux

Extract the miner to any folder you like and navigate to it

Locate and edit «config.ini» file with any notepad app

Copy the following and paste it into the file:

Fill your CFX address in the «wallet» line and this is petty much enough to start mining Conflux with Nanominer on Nanopool. The next steps are not necessary but if you have more than one RIG, it would be much more convenient if you set a different name for each so that you’ll be able to track them on the pool individually. You are also advised to set your email address in if you want to receive alerts form the pool when your worker (RIG) goes offline. You email will also be your password to access the settings. If you don’t want to receive the alerts, you can use a passphrase instead. As it’s not mandatory, feel free to jump down to the next step.

NOTE: Nanominer will connect to the pool’s default server, and It might be not the best choice for you as there’s latency and you want the server you connect to to be as closer to your location as possible. Therefore, by adding the follower parameter at the bottom of your Nanominer’s config.ini file:

You can be sure that Nanominer will automatically pick the server that has the lowest ping time from your location and the network latency will not affect your mining as the pool and the miner will communicate at the highest speed possible.
Full Configuration Example:

For AMD

1. Download Nbminer
Head over to GitHub and download the miner for Windows or Linux. Then unzip the archive to any folder.

2. Configure The Miner
Locate and edit «start_conflux» file. Copy the content below and paste it into the file.

You also can use SSL port instead of stratum:

Then fill your CFX address, a name for your RIG and your email address to receive alerts from the pool, otherwise, use a passphrase to access the account settings.

Step 5: Start the Miner

For Nanominer:
Windows OS

Start the miner by running the nanominer.exe file. Nanominer will start, run the commands to set those environment variables, initialize each of your GPU’s, build the DAG file on each of your GPU’s and start hashing away. After a while, you’ll be able to find your account on the pool.

Linux Distributives

For Linux — launch miner with cmd (terminal), like:

Note: cmd (terminal) must be opened in the same directory with the miner. You also can use cd to change current directory to the miner.

For NBminer

Windows OS

Double click the start_conflux.bat file to launch the miner. Nbminer will start, run the commands to set those environment variables, initialize each of your GPU’s, build the DAG file on each of your GPU’s and start hashing away. After a while, you’ll be able to find your account on the pool.

Linux Distributives

For Linux — launch miner with cmd ( terminal ), like:

Note: cmd ( terminal ) must be opened in the same directory with the miner. You also can use cd to change current directory to the miner.

Step 6: Find your Account on Nanopool

Remember there’s no registration on the pool. You just need to start mining and your account will automatically show up. However, allow some time as our system needs about 30 minutes to add your account to the pool’s database since your miner submitted its first share. So please, be patient and come back to Nanopool in a while, there’s Address filed on the right top in which you need to fill your Conflux address in. Once filled, hit enter, you’ll be redirected to your Nanopool account page.

Congrats! You have joined Nanopool. Spend some time to familiarize yourself with the pool and its features; you’ll like the interface.

Step 7: Make sure Your Mining goes Smoothly

Let your RIG to mine for at least 6 hours (or even 12) then come back to check your account statistic on the pool. You just need to compare your 6-hour Average hashrate (Nanopool estimates avg hashrate by shares sent from you rigs) with the Last Reported hashrate (it’s what your miner tells to the pool your hashrate is) and the values need to be close (the closer the better), however, allow 10% discrepancy. And if your 6-hour Average hashrate is lower by more than 10% than the Reported one, then there must be an issue and you should contact our team to figure it out.

Step 8: Predict your Profitability

There’s a number of major factors your income depends on and the most obvious, easily identifiable and broad numbers that affect your mining profit are:

1. Difficulty increase	The more users join the network to mine Conflux, the harder it’s to find a block.
2. Pool luck factor	Cryptocurrency mining is extremely luck based in its nature and when the pool finds fewer blocks than it should with its hashrate on average, it’s unlucky, but when it finds more blocks, the pool is lucky. And since our pool’s payout scheme is PPLNS (you get paid after the pool finds a block), your estimated reward may decrease in both cases, if the difficulty increases and the pool gets unlucky.
3.Hashrate constancy	Your reward is also affected by your hashrate constancy. The more your hashrate fluctuates (network/hardware issues) the less your reward may be.

Keep in mind, none of mining calculators are able to properly forecast the future, as they don’t simply take into account all possible variables, as a result this is almost near impossible to accurately predict uncertain inputs.

Источник