Не работают драйвера hawku

Проблемы с xp-pen g640

Нет аккаунта?

Проблемы с xp-pen g640

Доброго времени суток, осеры, нуждаюсь в Вашей помощи!
Недавно приобрел гп xp-pen g640, в родных дравах невозможно адекватно настроить область, уже много времени на это потратил, бессмысленно.
Смотрел разные туторы по установке дров от hawku, делал всё по инструкциям, но софт не видит планшет. В списках поддерживаемых гп присутствует, много способов перебрал, но всё так и не заработало.
Надеюсь на Вашу помощь!

для начала проверь — удалил ли ты офф. драйвера xp. у тебя на компьютере должны остаться только 1 драйвера, и это hawku (выбираем их)

после того как ты убедишься что у тебя только 1 драйвера, то:

1. отключи г.п. от пк и включи заново

1. подожди пока планшет полностью подключиться к пк

1. запусти / настрой hawku заново, и убедись что ты все правильно делаешь. он должен увидеть г.п.

Если это не поможет то:

1. удали hawku

1. заново отключи и подключи планшет (это не обязательно но на всякий)

1. заново скачай hawku и установи его по инструкции
   1. внимательно прочитай инструкцию

это должно помочь. в последнее время с xp хрень творится, впринципе как и всегда.. либо это что-то с дравами

Esutarosa wrote:

для начала проверь — удалил ли ты офф. драйвера xp. у тебя на компьютере должны остаться только 1 драйвера, и это hawku (выбираем их)

после того как ты убедишься что у тебя только 1 драйвера, то:

1. отключи г.п. от пк и включи заново

1. подожди пока планшет полностью подключиться к пк

1. запусти / настрой hawku заново, и убедись что ты все правильно делаешь. он должен увидеть г.п.

Если это не поможет то:

1. удали hawku

1. заново отключи и подключи планшет (это не обязательно но на всякий)

1. заново скачай hawku и установи его по инструкции
   1. внимательно прочитай инструкцию

это должно помочь. в последнее время с xp хрень творится, впринципе как и всегда.. либо это что-то с дравами

Точно по инструкции?)

Заходил в дочернюю папку driver_vmulti и устанавливал там .ехе?

Если так, то врядли можно ещё чем-то помочь

Источник

Driver Stopped, Restarting! Tablet not found! (Wacom) #1

Comments

albixow commented Mar 12, 2018

Did message you about this on reddit but you didn’t reply eventually so thought I’d post it here too. #

Tried everything I can think of, all my Wacom drivers are uninstalled, tried restarting pc, running as admin, nothing works. Just getting the same error.

The text was updated successfully, but these errors were encountered:

hawku commented Mar 13, 2018

Uninstall the «Wacom Tablet» device from the Window Device Manager.
Check the «Delete the driver software for this device.» checkbox when uninstalling the device.

albixow commented Mar 13, 2018

Tried it, then restarted PC, installed your driver, opened the Driver GUI and still the same error.

Calideon commented Mar 13, 2018

I have same issue, but my tablet is connected. There is screeenshot of my problem: https://puu.sh/zGNnX/093324cd3b.png

brimstone- commented Mar 13, 2018 •

With TabletDriver not yet installed, I uninstalled my current driver for my H420 with that particular checkbox ticked, Windows asked me to reboot, I unplugged my tablet before reboot, installed both the main driver and the huion one, rebooted, plugged in my tablet, launched the GUI, and am still getting the same error above. I also tried the tablet.cfg change in the reddit thread.

Edit: Someone on Reddit advised this particular change in my config and now the driver works!

derekxwu commented Mar 13, 2018

Reinstalling and re-uninstalling the Wacom driver (restarting both times) helped me with this problem.

Meigs2 commented Mar 13, 2018 •

Yeah, I’m getting the same issue here. Cant fix it. Let me see if updating windows helps and I’ll report back.

Edit: Sure doesn’t

Edit 2: Yeah, I’ve done everything thats been suggested. Not sure why it isn’t working. I’m on Windows 10, CTH-480. If anyone wants to use me for info on what could be the problem send me a message or add me on discord: Meigs2#478

Meigs2 commented Mar 14, 2018 •

WAIT Updating to the fall creators update in Windows 10 fully fixed my issues. Try FULLY updating windows for the people having this issue!

hawku commented Mar 14, 2018

@Meigs2 That is interesting. That might be the reason for these detection problems, because only few people seems to have the problem after uninstalling the drivers properly.
Are you using the latest version of the driver (0.0.13 or 0.0.14)?

Version 0.0.13 adds new tablet configurations (config\wacom.cfg), so that might have improved the Wacom tablet detection.

Please, right click the console and press Copy all and paste the «Tablet open!» part here. It should look like this:

Copy all function doesn’t work in the 0.0.13, so first you need to update the driver to version 0.0.14.

Meigs2 commented Mar 15, 2018

Nope, was using 0.0.12

dylanjerry commented Mar 26, 2018

I uninstalled all Tablet drivers and I have installed the vmulti device and reinstalled it multiple times
here is my problem

PHadaia commented Apr 3, 2018

None of the solutions here helped me. Cannot find any traces of old drivers on my pc (uninstalled and installed vmulti multiple times) still doesnt help.
Using CTL-471

melloeOsu commented Jun 16, 2018

Hey, maybe I’m just an idiot and this is a stupid quetion but..
Where is config\tablet.cfg? I can’t find it to make the proper edits to it
I use a CTL-460, and I downloaded the driver from the wacom website

BateauSD commented Aug 14, 2018

woahsia commented Oct 22, 2018

2018-10-23 00:42:23 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:23 [ERROR] Possible fixes:
2018-10-23 00:42:23 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:23 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:23 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
Driver stopped. Restarting!
2018-10-23 00:42:29 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:29 [ERROR] Possible fixes:
2018-10-23 00:42:29 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:29 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:29 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
2018-10-23 00:42:30 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:30 [ERROR] Possible fixes:
2018-10-23 00:42:30 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:30 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:30 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
Driver stopped. Restarting!

I was using an xp pen but it spoilt so I switched to my wacom cth 480. PRior to this I used the xp pen drivers, but decided to switch to these drivers for the wacom tablet. I uninstalled all my other drivers before installing this but I’m still getting these errors, nothing on this thread has helped so far

Источник

Driver Stopped, Restarting! Tablet not found! (Wacom) #1

Comments

albixow commented Mar 12, 2018

Did message you about this on reddit but you didn’t reply eventually so thought I’d post it here too. #

Tried everything I can think of, all my Wacom drivers are uninstalled, tried restarting pc, running as admin, nothing works. Just getting the same error.

The text was updated successfully, but these errors were encountered:

hawku commented Mar 13, 2018

Uninstall the «Wacom Tablet» device from the Window Device Manager.
Check the «Delete the driver software for this device.» checkbox when uninstalling the device.

albixow commented Mar 13, 2018

Tried it, then restarted PC, installed your driver, opened the Driver GUI and still the same error.

Calideon commented Mar 13, 2018

I have same issue, but my tablet is connected. There is screeenshot of my problem: https://puu.sh/zGNnX/093324cd3b.png

brimstone- commented Mar 13, 2018 •

With TabletDriver not yet installed, I uninstalled my current driver for my H420 with that particular checkbox ticked, Windows asked me to reboot, I unplugged my tablet before reboot, installed both the main driver and the huion one, rebooted, plugged in my tablet, launched the GUI, and am still getting the same error above. I also tried the tablet.cfg change in the reddit thread.

Edit: Someone on Reddit advised this particular change in my config and now the driver works!

derekxwu commented Mar 13, 2018

Reinstalling and re-uninstalling the Wacom driver (restarting both times) helped me with this problem.

Meigs2 commented Mar 13, 2018 •

Yeah, I’m getting the same issue here. Cant fix it. Let me see if updating windows helps and I’ll report back.

Edit: Sure doesn’t

Edit 2: Yeah, I’ve done everything thats been suggested. Not sure why it isn’t working. I’m on Windows 10, CTH-480. If anyone wants to use me for info on what could be the problem send me a message or add me on discord: Meigs2#478

Meigs2 commented Mar 14, 2018 •

WAIT Updating to the fall creators update in Windows 10 fully fixed my issues. Try FULLY updating windows for the people having this issue!

hawku commented Mar 14, 2018

@Meigs2 That is interesting. That might be the reason for these detection problems, because only few people seems to have the problem after uninstalling the drivers properly.
Are you using the latest version of the driver (0.0.13 or 0.0.14)?

Version 0.0.13 adds new tablet configurations (config\wacom.cfg), so that might have improved the Wacom tablet detection.

Please, right click the console and press Copy all and paste the «Tablet open!» part here. It should look like this:

Copy all function doesn’t work in the 0.0.13, so first you need to update the driver to version 0.0.14.

Meigs2 commented Mar 15, 2018

Nope, was using 0.0.12

dylanjerry commented Mar 26, 2018

I uninstalled all Tablet drivers and I have installed the vmulti device and reinstalled it multiple times
here is my problem

PHadaia commented Apr 3, 2018

None of the solutions here helped me. Cannot find any traces of old drivers on my pc (uninstalled and installed vmulti multiple times) still doesnt help.
Using CTL-471

melloeOsu commented Jun 16, 2018

Hey, maybe I’m just an idiot and this is a stupid quetion but..
Where is config\tablet.cfg? I can’t find it to make the proper edits to it
I use a CTL-460, and I downloaded the driver from the wacom website

BateauSD commented Aug 14, 2018

woahsia commented Oct 22, 2018

2018-10-23 00:42:23 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:23 [ERROR] Possible fixes:
2018-10-23 00:42:23 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:23 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:23 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
Driver stopped. Restarting!
2018-10-23 00:42:29 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:29 [ERROR] Possible fixes:
2018-10-23 00:42:29 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:29 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:29 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
2018-10-23 00:42:30 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:30 [ERROR] Possible fixes:
2018-10-23 00:42:30 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:30 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:30 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
Driver stopped. Restarting!

I was using an xp pen but it spoilt so I switched to my wacom cth 480. PRior to this I used the xp pen drivers, but decided to switch to these drivers for the wacom tablet. I uninstalled all my other drivers before installing this but I’m still getting these errors, nothing on this thread has helped so far

Источник

Hawku not working at all #350

Comments

Draxyn commented Jan 25, 2019

Switched to Hawku around a month or two ago, had a lot of problems to the point where it won’t even stay connected to my tablet any more. I’ve tried pretty much everything I can think of and I’m stuck as to what the problem is.

Hardware/software information

Windows Version: 10

Tablet Driver version: V0.2.3

Tablet model: Huion H420

The text was updated successfully, but these errors were encountered:

hawku commented Jan 25, 2019

@Draxyn Does the tablet disconnect from the PC?
Are you sure that USB cable doesn’t disconnect from the tablet?
I have had disconnection issues with multiple different devices that use mini USB connector.

Draxyn commented Jan 25, 2019

The tablet still works with the default windows ink stuff, just not with hawku. The little green light also still flashes which means it isn’t a dead cable.

riley-badour commented Jan 25, 2019

could be the vmuti driver not being installed with administrator privileges

hawku commented Jan 25, 2019

@Draxyn If the tablet’s USB connection quickly reconnects, then drivers might not be able to command the tablet to switch to driver mode, so the tablet disconnects from the driver and stays in normal Windows Ink mode.

Draxyn commented Jan 25, 2019

could be the vmuti driver not being installed with administrator privileges

Already tried that one I’m afraid

hawku commented Jan 25, 2019

@Draxyn You could also try to remove and reinstall the Huion drivers that are provided with the TabletDriver.

Draxyn commented Jan 25, 2019

@hawku Already tried that, doesn’t change anything.

hawku commented Jan 25, 2019

@Draxyn Does the official Huion drivers work with your tablet? Can you change the tablet area or other settings with the official drivers?

Draxyn commented Jan 25, 2019

@hawku yes, the official drivers work perfectly but I really don’t like using them as I’ve found hawku a hell of a lot easier to customise and use overall (apart from the issues, obviously)

hawku commented Jan 25, 2019

@Draxyn So is the problem that the TabletDriver connects to the tablet but doesn’t stay connected?
Can you record a debug log and try to record the disconnection.
Debug log instructions: #340 (comment)

Post the debug_*.log and startuplog.txt to here.

Draxyn commented Jan 25, 2019 •

I don’t think I’ll be able to replicate the connecting, it only connects briefly on launch and very rarely connects later on. @hawku
Edit: It won’t even connect on startup now

hawku commented Jan 25, 2019

@Draxyn Post the startuplog.txt

Draxyn commented Jan 25, 2019

@hawku there is no startlog, it doesn’t produce one. No clue what’s happening with it

hawku commented Jan 25, 2019

@Draxyn Maybe the TabletDriverService.exe is blocked by antivirus or something?
Try if the tools\RunServiceOnly.bat works.

Draxyn commented Jan 25, 2019

@hawku It opens but only shows an error message about the VMulti drivers and possible fixes

hawku commented Jan 25, 2019

@Draxyn Are the Huion or other tablet drivers running in the background?
Did the VMulti install correctly without error messages?

Draxyn commented Jan 25, 2019

@hawku That’s weird, I tried uninstalling it again and reinstalling and it seemed to make it work, however long it will work I don’t know but I’ll keep you updated. I don’t have any other tablet drivers installed anyway

RoARene317 commented Feb 7, 2019 •

Please leave the Screenshot so we can help you

alexcher-im commented Sep 21, 2019

Have the same issue with xp-pen deco 01. Sometimes input freezes and sometimes turns into windows ink mode, console in gui with debug logging just stops flooding at all. If i click on «Restart Driver» it can help or driver says «Tablet init failed!», then i need to reconnect tablet and restart driver once more.

Источник