Xcom wotc 2 community highlander не работает
I noticed that I still have performance degration because of projectiles.
Do I have to check anything specific (i.e compatibility with mods)?
@Kemba
What isn’t clear from the description?
The mod does two things:
1. Fixes bugs (too many to list)
2. Adds new functionality (too many to list) that can be used by other mods, so they can do what they want to do in a compatible manner.
Highlander achieves this by replacing a big portion of the base game codebase with an improved and expanded version.
@CaptainKampfkeks
Highlander is worth using even on its own because it fixes a lot of bugs.
Well, if you have the AlienHunters DLC you need to use both.
Yes you are correct that there can be only one Highlander (hence the name) and your confusion.
However. here’s how to think about it;
. this Highlander is a Highlander for WOTC
. the AlienHunters Highlander is for the DLC
One Highlander per One Aspect of the game.
If you have both aspects (WOTC and AH DLC) then you need both highlanders (CHL WOTC and CHL AH DLC)
@сапорт Я
Вопросы либо к Стиму либо к Лаунчеру. Моды скачивает Стим. Попробуйте перезагрузить компьютер, запустить стим, подождать несколько минут и после этого запустить лаунчер.
Лаунчер нужно использовать Alternative Mod Launcher, на данный момент официальный ланучер полон багов и не работает.
https://github.com/X2CommunityCore/xcom2-launcher/wiki
@RustyDios Separating mods from the workshop stops an automatic mod update breaking my campaign mid-play-through and stops my configs being overwritten.
I don’t need a solution, but I thought it worth mentioning after seeing Waxishi have the same problem and not finding a root cause. It’s also worth sharing to potentially help future troubleshooters, and additionally worth mentioning since of my 150 current workshop downloaded mods the highlander is the only one with this issue.
After copying all my mods from the workshop folder to another mods folder and unsubscribing to all of them I came across the same problem Waxishi described, my game would crash before the title screen with all mods enabled, and enabling just the highlander let the game launch and crashed on the title screen.
If I subscribe to the highlander through the workshop however my game works fine, even with all the other mods enabled, without needing to subscribe to those other mods through the workshop.
And after removing the highlander. confirm its folder is gone from your steam workshop folder . and follow the trooubleshooting steps for ‘reset config’
then download the highlander.
run the game unmodded (first load after a config purge should always be unmodded)
then activate the highlanders.. and run the game again
then slowly start introducing your other mods
As for the mods on AML, there are no conflicts, all broken and busted mods were removed AFAIK, and there are only five vanilla mods that work with WOTC and are required. Those five being:
One Million Colors
Beam Grenade Launcher
Project Vayne voicepack
Reward Decks Refresher
and Add Part Names
Then my next guess would be to make sure that you do NOT have the «-regenerateinis» option enabled in the AML .
After that its a case of using mods, and checking your modlist for a) conflicts b)vanilla mod in wotc that isn’t confirmed to work and c)broken busted mod
Does the Game start and play with JUST the Highlander + Alien Hunters Highlander plugin ?
Источник
Подпишитесь, чтобы загрузить
[BETA] X2WOTCCommunityHighlander v1.22.5
IF YOU USE THIS BETA VERSION UNSUBSCRIBE FROM THE STABLE HIGHLANDER MOD OR YOUR GAME WILL CRASH!
This is the BETA version of the Highlander. It contains the latest changes before they make their way into to the stable version.
You can help the Highlander team by using the BETA version instead of the stable version and providing feedback on bugs or new features.
WARNING: Use the BETA version at your own risk and not in an Ironman run. It is possible that the BETA contains undetected bugs and may crash your game or cause other issues.
Highlander replaces a big portion of the game’s code in order to make it more moddable and mod-compatible, as well as fix a lot of bugs.
As implied by the name, only one Highlander mod can be used at a time. Hence, the Highlander tries to address as many use cases as possible. Not counting fixing bugs, the Highlander does not change the behavior of the game, it merely provides ways for other mods to do so.
Everything that goes into Highlander undergoes rigorous testing and peer review.
Subscribe to the mod and enable it in your mod launcher like you would any other. You should see the Highlander’s name and current version appear in the lower right corner of the game’s main menu screen.
- Troubleshooting [github.com] — if you have issues running the game with Highlander active.
- Highlander Documentation [x2communitycore.github.io] — for modmakers.
- Highlander GitHub Page [github.com] — for issue reports and contributions.
Thank you for using the Highlander. Our objective is to support all modders to be all they can be, so if you have suggestions please let us know.
If you have Alien Hunters DLC installed and enabled, and you are using this version of the Highlander, then you also should install the [WOTC] Alien Hunters Community Highlander plugin as well.
Do NOT install that plugin if you do NOT have the Alien Hunters DLC.
Источник
Xcom wotc 2 community highlander не работает
After many months of not playing this game to coming back to it and things still dont work on this game. From super low frames to unsubbing mods from 200 something down to 177 mods to using the ATl Mod launcher to doing everything that ive read on here to get things to run again and nothing works.
Ive had things working with and before the alt mod launcher thingy till I get off the game to fix things around in the mod config or to go to bed and come back to the game not starting up.
Did I miss anything in between the tle came out, thats when I stop playing the game to wait for mods to come out to run with it and it seems the game doenst want to work any more.
Ive done things from deleting the configs to doing the in game stuff to reinstalling the game and I still get the XCOM 2 WOTC not responding popping up in a small screen.
Does it start without mods? If it does, it’s a mod problem.
Enable half of your mods. Does it start? If it doesn’t then problems in that
100. Disable half. Does it start? Rinse and repeat. It’s a surprisingly quick way of isolating a problem mod.
Not sure how much of this you know:
Some great Mod Troubleshooting advice.
That recommends the excellent Community Mod Launcher [github.com] , which everyone who uses mods should be using.
This guide gives some more detailed advice on using the Community Mod Launcher: Troubleshooting: Mods not working properly / at all
If you’ve just switched from the Firaxis Launcher, or are forced to use it, read the «Mods not activating/deactivating properly in WOTC» section of Mod not working? Mods still have their effects after you disable them?
If you’re using the Community Highlander then read its specific troubleshooting advice [github.com] .
The game did start with the mods but I had to stop because of the low frames so I went to low my mods from 200 plus to about 177 mods and switched over to the Launcher that you listed and the game still didnt run even after going though all of the stuff you listed bud.
Does it start without mods? If it does, it’s a mod problem.
Enable half of your mods. Does it start? If it doesn’t then problems in that
100. Disable half. Does it start? Rinse and repeat. It’s a surprisingly quick way of isolating a problem mod.
Not sure how much of this you know:
Some great Mod Troubleshooting advice.
That recommends the excellent Community Mod Launcher [github.com] , which everyone who uses mods should be using.
This guide gives some more detailed advice on using the Community Mod Launcher: Troubleshooting: Mods not working properly / at all
If you’ve just switched from the Firaxis Launcher, or are forced to use it, read the «Mods not activating/deactivating properly in WOTC» section of Mod not working? Mods still have their effects after you disable them?
If you’re using the Community Highlander then read its specific troubleshooting advice [github.com] .
Does it start without mods? If it does, it’s a mod problem.
Enable half of your mods. Does it start? If it doesn’t then problems in that
100. Disable half. Does it start? Rinse and repeat. It’s a surprisingly quick way of isolating a problem mod.
Not sure how much of this you know:
Some great Mod Troubleshooting advice.
That recommends the excellent Community Mod Launcher [github.com] , which everyone who uses mods should be using.
This guide gives some more detailed advice on using the Community Mod Launcher: Troubleshooting: Mods not working properly / at all
If you’ve just switched from the Firaxis Launcher, or are forced to use it, read the «Mods not activating/deactivating properly in WOTC» section of Mod not working? Mods still have their effects after you disable them?
If you’re using the Community Highlander then read its specific troubleshooting advice [github.com] .
I also found out that once I do get it to run with the Community Mod Launcher and do my changes with Visual Studio Code i get that error to not being able to run my game no more.
So ima try Notepad++ to see if anything happens.
Источник