Tse x50 как настроить

TSE X50 v2.0 Manual

TSE X50 v2.0 Manual

Text of TSE X50 v2.0 Manual

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

TSE X50 v2.0MANUAL

Thank you for purchasing TSE X50 v2.0We hope you have just as much fun using it as we had creating it!

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

1.0 Minimum system requirements1.1 Installation1.2 Overview1.3 Recommended system requirements

2.0 TSE8082.1 X502.2 Options / Cabinet2.3 Cabinet ( IR Loader )2.4 FX Rack2.5 Misc

3.0 Registration3.1 Troubleshooting

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

[ 1.0 ] Minimum system requirements

— Low Latency Audio Interface (ASIO/CoreAudio compatible) — High-Z (high impedance) instrument input or external D.I.BOX (for recording/monitoring).- Digital Audio Workstation (DAW) software or a standalone 32*/64bit VST/AU host.

MAC WINDOWSOSX 10.7 or higher Windows XP 32/64bit or newerIntel CPU Intel Pentium 4 or AMD Athlon XP (w/SSE2 instructions)

* Only 64bit support on MAC OS X

WindowsVST: Run the provided installer and install the plugin in your 32 or 64 bit VST folder.AAX / RTAS : Not yet supported.

MacRun the provided installer and install the plugin in your VST / Components folder.AAX / RTAS : Not yet supported.

TSE X50 v2.0 is a digital amplifier simulation using one of the most advanced/successful modeling techniques to this date.

This amp is modeled after / based on the EVH’s 5150 series where it tries to recreate the sound of the MK1 green channel and MK1+MK2 red channel.

The amp doesn’t have a clean channel, only crunch and lead. You could get a cleaner sound off it by running the pre-gain low and crunch switch off.

If you run into breakup’s while doing this — try reducing the input gain.

[ 1.3 ] RECOMMENDED SYSTEM REQUIREMENTS

Intel Core i3 processor or newer is recommended for the best user experience!

For recording or monitoring the guitar input, an audio buffer-size of 128 samples or less should be preferred to keep the latency down to a minimum.

This can be set in the interface software or the audio setup in your preferred DAW.

. — The TSE X50 v2.0 is made on a Intel Core i7 and is mainly meant to be used with modern processors. . — Tip: Use the freeze function in your DAW or run the software with automatic oversampling.

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

TSE808 is based on a very popular (op-amp based) tubescreamer.The pedal is a popular device within the metal-genre which spice up leads and/or tighten up the low-end on guitars while giving the amp an extra input boost.

Available controls :- Drive- Tone- Balance

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

X50 is the heart of this plugin — Modeled after a high-gain monster that was given birth to in the early 90’s. This is one of the most popular go-to amps in the metal-genre.

The first X50 model was made in early 2010 and has been upgraded numerous times since.

Available controls :- Pre Gain

— Post Gain*- Low End- Presence

— Bright switch (Green channel only)- Crunch switch (Green channel only)- Channel switch *Normalized to avoid blowing your ears/gear

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

— Disable preampDisables the preamp section of the amp.

— Disable power ampDisables the power amp section of the amp. (The output is taken from the effects send instead.)

— Red channel MK2 modThis modification turns the original MK1 model into a MK2 model, the MK2 model has a tighter low end and is more controllable, where the MK1 model brings the -‘brootalz’ basically all the way.

— Power TubesThis lets the user choose which tubes to be using, this is power amp related only.- 6L6GC — (Tetrode)- EL34 — (Pentode)

— BIASThis set’s the bias, or «starting-point» on the power amp. This is visually illustrated by the BIAS analyzer, where the blue vertical line is representing the bias point and where it’s currently set on the load line.

Place it on the most linear section of the load line (white) to get a more open sound,when you get closer to the extremes the power tubes will start breaking up more easily andgive you a different character of the distortion. There is no magical set-point, the default valuesare set where the tubes normally is biased, but you could find a different more likable flavorthat suits your music and playing style better.

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

[ 2.3 ] Cabinet ( IR Loader )

TSE X50 is delivered with a cpu-efficient zero-latency IR loader.The IRs are limited from 256 to 8192 samples, but the length is adjustable in between.

— The frequency analyzer shows the IR’s frequency response.(Relative to current IR length)

— LengthThe length knob adjust the numbers of samples used in the IR. A higher sample count means a more detailed low end representation, and brings in more of the actual room «response» where the IR was originally captured

— MovementThe movement knob adjusts the strength/harmonic content of the poweramp-to-speaker simulation. The harmonic content is strongest at the speaker’s resonance frequency. This effect is very subtle, but frequency dependent, and could spice up a rather lifeless IR by also modeling some physical speaker limitations.

— Width/PanPanning of the signal, when in mono this control only moves the signal left/right, but while in stereo this control move the stereo signal closer or further apart from center.

— VolumeAdjust the IR volume

— PhaseInvert the phase by 180 degrees

— DisableBypasses the IR loader completely

— X50 buttonShows the internal IR’s provided with the X50 pluginThey are the property of -and produced by:

Trackmix Studio (TMS Impulses)Ryan Harvey Audio (RHA Impulses)GuitarHack (GuitarHack impulses)Frozen Sun Audio (FSA impulses)

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

— File buttonLeft click: Browse the file structure of the systemRight click: Bring up the operating system’s own file browser. /Ctrl-clickThe file structure is automatically redirected to the last loaded file.

— Next buttonLoad the next IR in the folder.

— Prev buttonLoad the previous IR in the folder.

— File BrowserClick the upper left icon (folder w/arrow) to step one folder backYou can use your mouse-wheel to scroll up and down in the file window.Double-click on a file to load it !

TSE X50 v2.0 is delivered with a basic FX Rack.Modules are permanent at the moment, but there are plans to introduce more effects and to make them modular. (Dynamically Add/Remove FX)

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

TSE AUDIO’s simple but efficient guitar tuner. It should be able to tune bass guitars as well.Always tune upwards when tuning your guitars, especially on cheap guitars!

— Power — activate or deactivate the module- Sync — sync the time to the project BPM- Pong — switch between standard/pong delay- Time — adjust the time between delays.

Click on time value to enter manually. (will choose the nearest match if sync is enabled.)- Low — adjust the low frequencies cut-off point- High — adjust the high frequencies cut-off point- Width — adjust the width of the pong delay or asymmetry of the stereo delay- Mix — adjust the dry/wet signal blend- Feedback — adjust the amount of feedback

— High pass filter- Low Shelf filter- «Bell shaped» band filter- High shelf filter- Low pass filter- Volume- Low pass slope : 12 dB / 24 dB / 48 dBTry a higher low pass slope if you want a more aggressive high cut.

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

— ThreshAdjust the threshold of the noisegate.

— FadeAdjust the release time of the noisegate.

— AttackAdjust the attack time of the noise gate.

— Config window and controls

— InputAdjust the input gain of your guitar signal.

— LearnThis functions analyze your guitar signal over a timeframe of 5 seconds.It uses the maximum recorded value to determine how far you are from the set point.You should preferably play some hard palm mutes to get the highest signal peaks.

The set point is taken from EMG pickup specifications.

— OutputAdjust the output gain of the software.

— User IR DirectoryThis is where the file browser starts when you press ‘FILE’. Point it to the root of your third party IR directory.

TSE X50 v2.0 MANUALTSE AUDIO | www.TSEAUDIO.com | Org.No: 912 681 025

— 2X / 4X / 8XThis enables the plugin to run at a higher (internal) sample rate than the audio project itself. This helps in the reduction of aliasing by giving the anti-aliasing filters more ‘space’ to work with.

Aliasing occurs when high frequency content, generated by non-linear processing, is strong enough to wrap itself back down into the normal frequency spectrum and is usually identified as un-musical artifacts or harmonics/frequencies that is not supposed to be there at all.

This is sampling in a nutshell, if the sample rate is not high enough you cannot truly represent the original signal if it’s higher than SampleRate/2. This is easily seen in movies where cars are moving forward, but the wheels on the

Источник

Tse x50 как настроить

All components are included.

—> Pedal Board
X50
Dual IR Loader
FX Rack
Support/Updates

Some functions are disabled.
Occasional silence

—>
—> Save plugin state

TSE X50 v2.4.8

The X50 is a digital emulation of a famous US guitar amp. Because two almost similar amps were made both red channels are modeled. The green channel is modeled after the first amp.

You can’t go wrong with this amp for rock and metal!

• PEDAL BOARD — NoiseGate, TSE808, R47, Phaser, Pandora’s Box and SDM-2.
• TSE X50 v2.0 Pre+PA — Hi-gain guitar amplifier completely re-modeled with interconnecting algorithms!
• TSE X30 v2.0 Preamp — Hi-gain guitar amplifier completely re-modeled with interconnecting algorithms!
• RACK — Tuner, Delay, Equalizer, Reverb — Essential tools for getting that quick, good tone.
• Power Tubes — Switch between using 6L6GC or EL34 pentode models.
• BIAS — Use the bias control to set the operating-point that suits you most. (Power Amp)
• Oversampling — Oversampling from to 2X to 8X + Automatic oversampling from 2X to 4X / 4X to 8X.
• Input Learn — Set your input-gain to a preferred setpoint automatically.
• Lower cpu usage.
• Zero-latency IR-loader with adjustable IR length.
• IR Analyzer — Compare IR length vs frequency response in a graphical way!
• User IR Directory — Point X50 to your own IR collection.
• Movement Control — Poweramp to speaker emulation including your favorite IR into it’s process.
• Preset Manager — An extremely flexible module based preset manager.
• DaFuk Tuner — High precision tuner for low-tuned guitars.
• King-Pong — Pong and asymmetric stereo delay.
• Aqualaser — Equalizer with HP/LP, Lowshelf/Highshelf, peakfilter.
• Zero-latency and topology preserving modeling throughout the entire signal chain.
• Bundled IR’s from Chop Tones, SinMix, 3 Sigma Audio, Rosen Digital, Fat Lazy Cabs, Kalthallen Cabs, Frozen Sun Audio, Trackmix Studio, GuitarHack, and Ryan Harvey Audio.

Источник

Music create: VST инструменты | Эффекты | Сэмплы | Скачать бесплатно программы для создания музыки

TSE audio X50 v2.4.8 CE (Team V.R) — гитарный усилитель

TSE X50 v2 — это цифровая эмуляция известного американского гитарного усилителя. Поскольку были созданы два почти одинаковых усилителя, моделируются красные каналы. Зеленый канал моделируется после первого усилителя.

Вы не ошибётесь с этим усилителем для Rock и Metal!

PEDAL BOARD — NoiseGate, TSE808, R47, Phaser, Pandora’s Box and SDM-2.
TSE X50 v2.0 Pre+PA — Hi-gain guitar amplifier completely re-modeled with interconnecting algorithms!
TSE X30 v2.0 Preamp — Hi-gain guitar amplifier completely re-modeled with interconnecting algorithms!
RACK — Tuner, Delay, Equalizer, Reverb — Essential tools for getting that quick, good tone.

Power Tubes — Switch between using 6L6GC or EL34 pentode models.
BIAS — Use the bias control to set the operating-point that suits you most. (Power Amp)
Oversampling — Oversampling from to 2X to 8X + Automatic oversampling from 2X to 4X / 4X to 8X.
Input Learn — Set your input-gain to a preferred setpoint automatically.
Lower cpu usage.

Zero-latency IR-loader with adjustable IR length.
IR Analyzer — Compare IR length vs frequency response in a graphical way!
User IR Directory — Point X50 to your own IR collection.
Movement Control — Poweramp to speaker emulation including your favorite IR into it’s process.
Preset Manager — An extremely flexible module based preset manager.

DaFuk Tuner — High precision tuner for low-tuned guitars.
King-Pong — Pong and asymmetric stereo delay.
Aqualaser — Equalizer with HP/LP, Lowshelf/Highshelf, peakfilter.

Zero-latency and topology preserving modeling throughout the entire signal chain.
Bundled IR’s from Chop Tones, SinMix, 3 Sigma Audio, Rosen Digital, Fat Lazy Cabs, Kalthallen Cabs, Frozen Sun Audio, Trackmix Studio, GuitarHack, and Ryan Harvey Audio.

Источник

TSE Audio — TSE X50 v.2.4.6, VST AAX AU, WIN OSX, x86 x64 — гитарный усилитель

TSE Audio — TSE X50 v.2.4.6, VST AAX AU, WIN OSX, x86 x64

Дата Выпуска: 30.09.2016
Версия: 2.4.6
Разработчик: TSE Audio
Сайт разработчика: tseaudio.com
Формат: VST
Разрядность: 32bit, 64bit
Таблэтка: присутствует
Системные требования: MIN (WIN) MIN (MAC)
CPU Intel Core 2 Intel Core 2
OS Windows 7 OS X 10.7
DAW VST compatible or Pro Tools 11 VST/AU compatible or Pro Tools 11
Supported Plugin Formats VST2 and AAX64 VST2, Audio Unit and AAX64
Размер: 266 MB

TSE Audio — TSE X50 — цепь гитарных эффектов, в составе:

• PEDAL BOARD — Including NoiseGate, TSE808, R47, Phaser and Pandora’s Box.
• TSE X50 v2.0 Pre+PA — Hi-gain guitar amplifier completely re-modeled with new interconnecting algorithms!
• TSE X30 v2.0 Preamp — Hi-gain guitar amplifier completely re-modeled with new interconnecting algorithms!
• RACK — Tuner, Delay, Equalizer, Reverb — Essential tools for getting that quick, good tone.

• Power Tubes — Switch between using 6L6GC or EL34 pentode models.
• BIAS — Use the bias control to set the operating-point that suits you most. (Power Amp)
• Oversampling — Oversampling from to 2X to 8X + Automatic oversampling from 2X to 4X / 4X to 8X.
• Input Learn — Set your input-gain to a preferred setpoint automatically.
• Lower cpu usage.

• Zero-latency IR-loader with adjustable IR length.
• IR Analyzer — Compare IR length vs frequency response in a graphical way!
• User IR Directory — Point X50 to your own IR collection.
• Movement Control — Poweramp to speaker emulation including your favorite IR into it’s process.
• Preset Manager — An extremely flexible module based preset manager.

• DaFuk Tuner — High precision tuner for low-tuned guitars.
• King-Pong — Pong and asymmetric stereo delay.
• Aqualaser — Equalizer with HP/LP, Lowshelf/Highshelf, peakfilter.

• Zero-latency and topology preserving modeling throughout the entire signal chain.
• Included IR’s from 3 Sigma Audio, Rosen Digital, Fat Lazy Cabs, Kalthallen Cabs, Frozen Sun Audio, Trackmix Studio, GuitarHack, and • Ryan Harvey Audio.

Источник